Epoxy measuring rod introduced telescopic measuring rod specifications] altimeter rod manufacturers A3 five-star 

 Epoxy measuring rod introduced telescopic measuring rod specifications] altimeter rod manufacturers A3 five-star 

 Product Name: altimeter rod 
 Alias: telescopic insulation measured high pole, high-pressure altimeter rod, light measuring high pole, high pole of stretching measured 

 Product Type: super-light insulating telescopic measuring rod 
 Scope of application: measuring the high pole used to measure the wire height of the cross-over distance of the line 
 Measuring the high pole classification: 
 1 the altimeter rod in accordance with the voltage level can be divided into 10KV, 35KV, 110KV, 220KV, 500KV 
 . The altimeter rod can be divided in accordance with length of 8 m, 9 m, 10 m, 11 m, 12 m, 13 m, 14 m, 15 m 

 Quantity: not limited to brand: Hebei rainbow Packaging: Toi 
 Altimeter rod made of several insulating materials of high quality glass fiber cloth, epoxy resin and 306 resin, phthalic anhydride, fiberglass cloth, and curing agents used to traverse the height of the lines cross each other over distances. 
 The altimeter rod production process, including: high temperature and then mold the initial setting, and then remove the mold, polished after the second heat, a coarse grinding, two fine grinding, and then in the paint production costs of goods. 
 Altimeter rod features: five-star power insulation material insulating properties and superior mechanical strength, light weight, moisture treatment of high-quality epoxy glass steel refined, ultra light, ultra-high pressure, high-intensity. 

 Five-star discharge rods ㊣ five-star high-pressure altimeter rod ㊣ a3 ㊣ a3 ㊣ can be customized ㊣ five-star high-pressure measurements of the discharge rods ㊣ five-star high pole ㊣ a3 ㊣ ㊣ five-star high-pressure measurements of the discharge rods ㊣ five-star high pole can be customized to ㊣ ㊣ five-star discharge can be customized to Stick ㊣ five-star high-pressure altimeter rod ㊣ the a3 ㊣ can be customized ㊣ 

 Discharge Stick Note 

 1, when the discharge of the large capacitance of the test product to be in the test is finished, disconnect the test power supply, you should wait for some time, so that the charge on the test product by the times the pressure tube and the test product itself to self-discharge. You can observe the voltmeter voltage on the control box gradually decline in the fall, when the voltmeter voltage drops to a lower voltage, general in 5kV ~ 15kV or so, before they are allowed to discharge rod to gradually move to the vicinity of the test product. The first free air discharge through the gap, then you can hear the hissing sound, no sound, discharge rod tip to touch the test product, and finally the test sample directly to ground discharge. 

 2, the large capacitance of the test product accumulated charge size and the size of the capacitance of the test product and the level and duration of applied voltage is proportional to. 

 3, after the end of more than a few kilometers of high voltage cable test, the discharge time generally required for a long, and the need to repeatedly discharge. Resistance capacity, need to order the discharge of large-capacity stick. 

 4, is strictly prohibited pull test power to discharge the discharge rods of the test product. 

 Epoxy measuring rod introduced telescopic measuring rod specifications] altimeter rod manufacturers A3 five-star 

 Epoxy measuring rod introduced telescopic measuring rod specifications] altimeter rod manufacturers A3 five-star